Easy Wheel Assembly

MONARCH / ECHO: Screw the feet to the base using 4 screws (2 per foot). Set the wheel upright, place the head into the base, and secure with the black screw. Install the drive band and start spinning.

POLLYWOG / BULLFROG: Set the base upright and secure the head with the black screw. If using a Pollywog accelerator, attach it to the base first, then secure the head above it. Install the drive band(s) and start spinning.

FIREFLY: Loop the drive band over the head, hanging between the whorl and neck. Place the head into the base and secure with the black screw. Install the drive bands (see video). Flip the blue switch to "Spin," power switch to "on," and adjust the speed dial to align the band. Your Firefly is ready to spin immediately with some charge, and after overnight charging, the battery lasts over 14 hours.

BEE : Pull the dark wooden knob toward you, then lift the flyer to the right to open the wheel. Once fully open, release the knob and listen for a "click" to ensure it's locked. Install the drive bands and start spinning.

HOPPER: Place the U-shaped stand on the floor to sit the wheel upright. Lift the treadles, slide the head bearings into the hub, and secure the head with the black screw. Install the drive bands and start spinning.